Car Parking

TRILFOR EP25 is a two part 100% solid epoxy resin priming system.It is suitable for priming concrete surfaces prior to the application of any of the triflor range of resin based floor toppings.

Triflor Antiskid floor coatings are three pack component system includes resin, hardner and fillers.Triflor antiskid Flooring Aggregates are granules and sands that are used for anti-skid protection. These anti-skid coatings are excellent for ramps, loading docks, walkways, stairs, parkings where non-skid finish is desired.

Triflor SL is based on carefully selected solvent less Epoxy resin composition. It is a four component system consisting of base, hardener and hard wearing quartz fillers and Pigment paste. It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping.

Triflor TC 250 is based on carefully selected solvent less Epoxy resin composition. It is a four component system consisting of base, hardener and hard wearing quartz fillers and Pigment paste. It is a self leveling composition and forms a very smooth, attractive hygienic, hard wearing and chemical resistant floor topping.

A fast drying, high build, epoxy ester-based road and line marking paint. Centre coat Single Pack Road Epoxy is designed to be compatible with most of the surfaces that require line-marking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving, factory floor demarcations and wood

A fast drying, high build, epoxy ester-based road and line marking paint. Centre coat Single Pack Road Epoxy is designed to be compatible with most of the surfaces that require line-marking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving, factory floor demarcations and wood

A fast drying, high build, epoxy ester-based road and line marking paint. Centre coat Single Pack Road Epoxy is designed to be compatible with most of the surfaces that require line-marking paints to be applied. These include roads, car parks (concrete or tarmac/weathered blacktop), airfield runways etc. Typical other uses are brick, paving, factory floor demarcations and wood

Triflor Diamond hard is quality controlled, factory blended powder which are ready to use on site. They contain special hardwearing aggregates which have been selected for abrasion and wear resistant properties as well as shape and size